Seite 1
Das SIPLUS S7-1500 Cooling Fan 175mm (Lüftermodul) ist ein Zusatzmodul für den Betrieb einer kompatiblen SIPLUS S7- 1500 CPU an Orten mit erhöhter Umgebungstemperatur. Mit dem SIPLUS S7-1500 Cooling Fan 175mm ist der Betrieb einer kompatiblen CPU bis zu einer Umgebungstemperatur von +70 °C möglich.
Kompatible CPUs Das SIPLUS S7-1500 Cooling Fan 175mm können Sie an diesen CPUs verwenden: Bezeichnung Artikelnummer SIPLUS S7-1500 CPU 1518-4 PN/DP 6AG1518-4AP00-4AB0 SIPLUS S7-1500 CPU 1518-4 PN/DP MFP 6AG1518-4AX00-4AB0 SIPLUS S7-1500 CPU 1518F-4 PN/DP 6AG1518-4FP00-4AB0 Sicherheitshinweise Gefährliche Spannung Befolgen Sie die 5 Sicherheitsregeln, bevor Sie an der Anlage arbeiten.
Einhängelaschen Montage Das SIPLUS S7-1500 Cooling Fan 175mm ist für die Montage auf S7-1500 CPUs mit einer Gehäusebreite von 175 mm vorgesehen. Halten Sie über dem SIPLUS S7-1500 Cooling Fan 175mm und unter der CPU einen Freiraum von ≥ 50 mm.
Seite 4
2. Klappen Sie das SIPLUS S7-1500 Cooling Fan 175mm nach unten und führen Sie dabei die Befestigungselemente ④ in das Lüftungsgitter der CPU ein. Drücken Sie das SIPLUS S7-1500 Cooling Fan 175mm nach unten, bis es vollständig auf der CPU aufliegt.
Anschließen Der Anschluss-Stecker ist im Auslieferungszustand des SIPLUS S7-1500 Cooling Fan 175mm gesteckt. Stecker Signalname Bezeichnung DC 24 V von der CPU-Versorgungsspannung Masse von der CPU-Versorgungsspannung O.K. Digitalausgang Masse des Digitalausgangs Statusanzeigen In der folgenden Tabelle ist die Bedeutung der Statusmeldungen angegeben.
You can find additional product information here (https://i.siemens.com/1P6AG1593-0AA00-7AA0). Area of application The SIPLUS S7-1500 Cooling Fan 175mm (fan module) is an add-on module for operating a compatible SIPLUS S7-1500 CPU in locations with elevated ambient temperature. SIPLUS S7-1500 Cooling Fan 175mm enables operation of a compatible CPU up to an ambient temperature of +70 °C.
Seite 7
Compatible CPUs You can use the SIPLUS S7-1500 Cooling Fan 175mm on these CPUs: Name Article number SIPLUS S7-1500 CPU 1518-4 PN/DP 6AG1518-4AP00-4AB0 SIPLUS S7-1500 CPU 1518-4 PN/DP MFP 6AG1518-4AX00-4AB0 SIPLUS S7-1500 CPU 1518F-4 PN/DP 6AG1518-4FP00-4AB0 Safety instructions Dangerous voltage Follow the 5 safety rules before working on the system.
Hanging lugs Installation The SIPLUS S7-1500 Cooling Fan 175mm is designed for mounting on S7-1500 CPUs with an enclosure width of 175 mm. Maintain a clearance of ≥ 50 mm above the SIPLUS S7-1500 Cooling Fan 175mm and under the CPU.
Seite 9
Follow these instructions for installation. 1. Hang the SIPLUS S7-1500 Cooling Fan 175mm with the hanging lugs ⑦ into the housing hooks on the back of the CPU. 2. Flip down the SIPLUS S7-1500 Cooling Fan 175mm while inserting the fasteners ④ into the ventilation grille of the CPU.
Wiring The connection plug SIPLUS S7-1500 Cooling Fan 175mm is inserted in the factory state. Connector Signal name Name 24 V DC of the CPU supply voltage Ground of the CPU supply voltage O.K. Digital output Ground of the digital output Status displays The following table shows the meaning of the status messages.