Basic Playback; Playing A Source; Listening In Surround Sound - Pioneer SC-LX73 Kurzanleitung

Basic playback

Chapter 4:
Basic playback
Important
• The procedure for setting the receiver operation
mode differs for the remote controls included with
the SC-LX83 and SC-LX73. For the SC-LX83's remote
control, set the remote control operation selector
switch to RECEIVER. For the SC-LX73's remote
RECEIVER
control, press the
remote control to the receiver operation mode" is
indicated in these instructions, use the respective
procedure described above.

Playing a source

Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
1 Switch on your system components and receiver.
Make sure that the TV's video input is set to this receiver.
2 Set the remote control to the receiver operation
mode.
3 Select the input function you want to play.
You can use the input function buttons on the remote
control, INPUT SELECT, or the front panel INPUT
1
SELECTOR dial.
4 Press AUTO/ALC/DIRECT to select 'AUTO
SURROUND' and start playback of the source.
If you're playing a Dolby Digital or DTS surround sound
source, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
5 Use the volume control to adjust the volume level.
Note
1 If you need to manually switch the input signal type press SIGNAL SEL.
2 You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It should be set to output Dolby Digital,
DTS and 88.2 kHz / 96 kHz PCM (2 channel) audio, and if there is an MPEG audio option, set this to convert the MPEG audio to PCM.
button. When "set the
2

Listening in surround sound

Using this receiver, you can listen to any source in
surround sound.
Standard surround sound
The following modes provide basic surround sound for
stereo and multichannel sources.
• While listening to a source, set the remote control
to the receiver operation mode, then press STANDARD.
If necessary, press repeatedly to select a listening mode.
The listening modes that can be selected depend on the
input signals and settings.
With two channel sources, you can select from:
• 2 Pro Logic IIx MOVIE
• 2 Pro Logic IIx MUSIC
• 2 Pro Logic IIx GAME
• 2 PRO LOGIC – Suitable for old movie
• 2 Pro Logic IIz HEIGHT – Suitable for Front height
system
• WIDE SURROUND MOVIE – Suitable for Front wide
system
• WIDE SURROUND MUSIC – Suitable for Front wide
system
• Neo:6 CINEMA
• Neo:6 MUSIC
• Neural Surround – Suitable for music sources
With multichannel sources, you can select from:
• 2 Pro Logic IIx MOVIE
• 2 Pro Logic IIx MUSIC
• Dolby Digital EX – Suitable for movie and music
sources
• DTS-ES – Suitable for movie and music sources
• DTS Neo:6 – Suitable for movie and music sources
• 2 Pro Logic IIz HEIGHT – See above
• WIDE SURROUND MOVIE – See above
• WIDE SURROUND MUSIC – See above
• Straight Decode – Plays back without the effects
above.
04
33
En