Pioneer SC-LX73 Kurzanleitung Seite 10

01 Before you start
Remote control display
Remote control display for infrared signal
transmission (default)
1
MAIN
iPod/USB
Remote control display for RF two-way
communications
1
MAIN
AV RECEIVER
VIDEO
1. Adv MCACC
8 9
1 Remote control operating zone indicator
This indicates which zone the remote control is currently
set to operate. The display indicates the setting of the
MULTI-ZONE operation selector switch.
Only when RF two-way communications:
The box display here indicates the communication status
between this remote control unit and the receiver.
(White box with black letters): Two-way
MAIN
communications are established and the receiver's
power is on.
(Gray box with black letters): Two-way
MAIN
communications are established and the receiver's
power is off.
(White letters only): Two-way communications are
MAIN
not working well. In this case, the area indicating the
receiver's status (12) is not displayed.
Note
1 The display lights when a remote control operation is performed, then turns off after 20 seconds if no other operation is performed. When in
the Remote Setup mode, the setup is canceled and the display turns off if no operation is performed for 1 minute.
2 • This is displayed when an RF adapter is connected to the receiver and paired with the remote control. For details, see Using the RF
communications function on the Operating Instructions in CD-ROM.
• Depending on the communications environment, two-way communications may not work well and the remote control display may not reflect
the receiver's status.
10
En
1
2 3 4 5
IR SOURCE
2
2 3 4 5
RF RCV CTRL
+12.
0dB
10 11
2 Remote control code sending indicator
This appears when signals are sent from the remote
control.
3 Remote control code sending mode indicator
This indicates whether remote control codes are being
sent by infrared (IR) signal or RF communications.
6
4 Remote control operation indicator
This indicates which operation mode the remote control
is currently set to. The display indicates the setting of the
remote control operation selector switch.
5 Input function and sending code indicator
This indicates what input function can currently be
operated with the remote control. Also, when a button is
pressed and its operation code is sent, the name of that
7
code is displayed.
6 Area indicating the remote control's status
7 Nothing displayed
Nothing is displayed here when the remote control code
6
sending mode is set to IR.
8 Scroll indicators
Light when there are more selectable items when making
the various settings.
9 Receiver input indicator
This indicates the input function currently selected for
the receiver's zone.
10 Receiver display
12
The same information as on the receiver's display is
displayed here.
11 Master volume display
This indicates the volume of the receiver's main zone
using, as an icon and in decibels (dB). When the sound
is muted, the
12 Area indicating the receiver's status
icon is displayed.