Pioneer SC-LX73 Kurzanleitung Seite 12

01 Before you start
SLEEP – Use to put the receiver in sleep mode and
select the amount of time before sleep.
CH LEVEL – Press repeatedly to select a channel,
then use / to adjust the level.
A.ATT – Attenuates (lowers) the level of an analog
input signal to prevent distortion.
DIMMER – Dims or brightens the display.
9 MULTI-ZONE select buttons
Switch to perform operations in ZONE 2 and ZONE 3.
10 Remote control LED
Lights when a command is sent from the remote control.
RECEIVER
11
Switches the remote to control the receiver (used to
select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.
12 MASTER VOLUME +/–
Use to set the listening volume.
13 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
14
Press to turn on/off the illumination for the buttons. The
way the buttons light can be selected from four modes
(see the Operating Instructions in CD-ROM for detail).
12
En