Aux; Bluetooth - Kenwood KMR-M308BTE Bedienungsanleitung

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 4)
Start listening
1
Connect a portable audio player
(commercially available).
Auxiliary input jack
3.5 mm stereo mini plug with "L"
shaped connector (commercially
available)
2 Press B SRC to select AUX.
3
Turn on the portable audio player and
start playback.
Set the AUX name
While listening to a portable audio player
connected to the unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM],
then press the knob.
3
Turn the volume knob to select [AUX NAME
SET], then press the knob.
4
Turn the volume knob to make a selection,
then press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold to exit.
8
BLUETOOTH®
You can operate Bluetooth devices using this
unit.
Connect the microphone
Microphone
input jack
Portable audio
player
Adjust the
microphone angle
If you turn off the unit or detach the control
panel during a phone call conversation,
the Bluetooth connection is disconnected.
Continue the conversation using your mobile
phone.
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
Microphone
Rear panel
(supplied)
Secure using cord clamps (not
supplied) if necessary.
Pair a Bluetooth device
When connecting a Bluetooth device to the
unit for the first time, perform pairing between
the unit and the device. Once the pairing is
completed, the Bluetooth device will remain
registered in the unit even if you reset the unit.
• Up to five devices can be registered (paired)
in total.
• A maximum of two Bluetooth phones and
one Bluetooth audio device can be connected
at any time.
• This unit supports Secure Simple Pairing
(SSP).
• Some Bluetooth devices may not
automatically connect to the unit after
pairing. Connect the device to the unit
manually. Refer to the instruction manual of
the Bluetooth device for more information.
Press B SRC to turn on the unit.
1
2
Search and select this unit model name
(KMM-BT3*/ KMM-3**BT/ KMR-M3**BTE)
on the Bluetooth device.
"PAIRING" "PASS XXXXXX" Device
name "PRESS" "VOLUME KNOB" scrolls
on the display.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is
completed and "BT" will light up when the
Bluetooth connection is established.
• For some Bluetooth devices, you may need
to enter the Personal Identification Number
(PIN) code immediately after searching.