Zenoah GZ360 Bedienungsanweisung Seite 36

Guide bar
Length, in/cm Pitch, in
14/36 3/8 mini
Filing equipment and filing angles
Using Zenoah file gauge will give you the correct filing
angles. We recommend you to always use a Zenoah file
gauge to restore the sharpness of the saw chain. The
part numbers are given in the table below.
H37
36
Gauge,
in/mm
0.050/1.3
4 mm 579 65 36-01
Saw chain
Max. nose ra- Type
dius
7T Zenoah H37
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit your servicing
dealer for more information.
0,65 mm
Length, drive Low Kick-
links (no.) back
52 Yes
30° 80°
321 - 006 - 08.11.2018