Dmx-Mode - Futurelight Pro Slim Par-7 Qcl Rgbw/Rgba Bedienungsanleitung

Setting dimmer speed (step response)
Press the MODE button until the display shows DIM. Press the ENTER button. You can select OFF / DIM1 /
DIM2 oder DIM3 (decreasing speed) via the UP or DOWN buttons. Confirm your choice by pressing ENTER.
Mode:
DIM
Setting solid colors
When the display shows C, you can select the desired solid color. Please see the following table.
Mode:
C
Setting DMX Channel Mode
Mode:
CHA
Setting the DMX starting address:
Press the MODE button after selecting the DMX Channel Mode. You can adjust the desired DMX starting
address by pressing UP or DOWN.
Mode:
Addr d 1 - d512

DMX-Mode

The device has three different DMX channel modes. The Control Board allows you, as described above, to
assign the DMX channel mode.
Addressing
Press the MODE-button until the display shows Addr. You can now set the desired address via the UP or
DOWN buttons. Press ENTER to confirm. The Control Board allows you to assign the DMX fixture address,
which is defined as the first channel from which the FUTURELIGHT PRO Slim PAR-7 QCL RGBW/RGBA
will respond to the controller.
Please, be sure that you don't have any overlapping channels in order to control each FUTURELIGHT PRO
Slim PAR-7 QCL RGBW/RGBA correctly and independently from any other fixture on the DMX-chain.
If several PRO Slim PAR-7 QCL RGBW/RGBA are addressed similarly, they will work synchronically.
Controlling:
After having addressed the PRO Slim PAR-7 QCL RGBW/RGBA, you may now start operating it via your
lighting controller.
Value:
OFF
DIM1
DIM2
DIM3
Value:
C-01
C-02
C-03
C-04
C-05
C-06
C-07
C-08
C-09
C-10
C-11
C-12
C-13 Green + Blue + White or Amber
C-14 Red + Green + White or Amber
C-15 Red + Green + Blue + White or Amber
Value:
10CH
6CH
4CH
Value:
Function:
Red
Green
Blue
White or Amber
Red + Green
Red + Blue
Green + Blue
Red + Green + Blue
Red + White or Amber
Blue + White or Amber
Green + White or Amber
Red + Blue + White or Amber
26/31 00074252, Version 1.0