Telephone Keys; Telephone Configuration - Swissvoice CP-30 Bedienungsanleitung

CP-30

Telephone keys

Ring Volume Switch
Memory keys
M1 - M0
Store button

Telephone configuration

Note : Immediately change the following factory settings.
Speaker volume level adjustment
You can adjust the speaker volume level using the switch on the right side of your tele-
phone.
Ringer volume level
The phone will ring when there is an incoming call. You can set the ringer volume to
high, middle or low level. The ringer volume switch is indicated in the following illustra-
tion under A.
Pulse tone setting
You can select P (PULSE) or T(TONE) dialing mode according to the requirements
from the local telephone operator. The T/P switch is indicated in the following illustra-
tion under B.
10
All manuals and user guides at all-guides.com
Tone/Pulse
Switch
Flash button
Flash Time Switch
Speaker volume switch
Mute indicator
Mute button
In use indicator
Message indicator
Redial button
Speaker button
Microphone
CP-30