Assembly - Sage Smart Grill BGR820 Kurzanleitung

Assembly

PREPARING THE GRILL FOR USE
1. Remove and safely discard any packing
material and promotional labels from the
grill.
2. Wipe the cooking plates and drip tray with
a soft damp sponge. Dry thoroughly.
3. Ensure the drip tray is correctly inserted
into the grill.
4. Ensure the cooking plates are correctly
inserted and securely locked into position.
5. Place the grill on a flat, dry surface. Ensure
there is a minimum distance of 10cm of
space on both sides of the appliance.
6. Unwind the power cord completely and
insert the power plug into a grounded wall
outlet.
7. The grill alert will sound, and the LCD
screen will display OFF.
8. The grill is now ready for the preheating
cycle.
8
NOTE
The grill features 2 x PLATE RELEASE.
These allow you to independently remove
the top and bottom cooking plates for easy
cleaning, or to interchange plate positions.
USING THE PLATE RELEASE
To use the plate release, always ensure the
grill is completely cool. Use the handle to
open the top plate to a 90-degree position.
Use the 'Plate Release' on the front, right side
of the top plate to remove the top cooking
plate, and the 'Plate Release' on the left side
of the control panel to remove the bottom
cooking plate. Once released, gently slide
the plates off the grill.
NOTE
If the cooking plates are incorrectly inserted,
the LCD screen will display Er1. Use the 2 x
PLATE RELEASE to remove the plates then
re-insert so they securely lock into position.
Always ensure the grill is completely cool
before releasing and removing the cooking
plates.
When the grill is turned on and heating for
the first time, it may emit a fine smoke haze.
This is due to the protective substances
on the heating elements. It is safe and not
detrimental to the performance of the grill.