Cleaning The Exhaust Filter - Hoover SLALOM SL8123 Bedienungsanleitung

CLEANING THE PRE MOTOR FILTERS
Press the bin release buttons
1
and remove the dust bin from
the cleaner.
Remove the turbo tool from the
top cover of the cleaner.
Separate the GREY foam filter
4
from the BLUE HEPA filter pack
using the tab provided.
Gently tap both filters against
the side of a bin to release
excess dust.
!
IMPORTANT! For optimum performance, shake off excess dust from the filters regularly.
We recommend that the GREY foam filter and the BLUE hepa filter are washed every 3 MONTHS.
Slalom IM_4 langs.indd 10
!
IMPORTANT! For optimum performance,
always keep your filters clean.
Place the bin on a flat surface
2
and press the filter access
button to open the top cover of
the bin.
Wash the GREY foam filter
5
thoroughly under hand warm
water until the water runs
clean.
Remove excess water by
shaking and leave to dry for 24
hours.
DO NOT USE HOT WATER
OR DETERGENTS.
Remove the BLUE filter pack
3
(containing the HEPA and foam
filter).
Wash the BLUE HEPA filter
6
thoroughly from the inside under
hand warm water until the water
runs clean.
Remove excess water by
shaking and leave to dry for 24
hours. When completely dry
reassemble and refit filters to
cleaner.
DO NOT USE HOT WATER OR
DETERGENTS.
- 10 -

CLEANING THE EXHAUST FILTER

Lift the tab on the exhaust filter cover grille and
1
remove from the cleaner.
Remove the exhaust filter.
2
Wash the exhaust filter under hand warm water
3
until the water runs clean. Remove excess water
by shaking and leave to dry for 24 hours.
Refit filter only when completely dry.
DO NOT USE HOT
DETERGENTS.
!
IMPORTANT! For optimum performance,
always keep your filters clean. We recommend
that the exhaust filter should be washed every
3 MONTHS.
GB
WATER OR
03/09/2008 17:43:51