Cleaning The Filters - Hoover Pure Power PU31PU10 Bedienungsanleitung

CLEaning THE FiLTErS*

Pre- motor filter
The pre-motor filter should be washed every three months.
The Carbon filter is normally maintenance free, this component should not be
washed. If a replacement is required please contact our spares department.
Remove bag door and lift out filter.
Wash filter under hand warm water.
DO NOT USE HOT WATER OR DETERGENTS!
Remove excess water by shaking and leave to
dry for 24 hours. Refit filters only when completely
dry.
!
* Certain models only
!
imPOrTanT: For optimum cleaning performance, always keep
your filters clean.
Exhaust filter
The exhaust filter should be washed every month.
HEPA exhaust filter*
Press down on latch and
remove the exhaust filter cover.
Lift out the exhaust filter.
Wash filter under hand warm
water.
DO NOT USE HOT WATER OR
DETERGENTS!
Remove excess water by
shaking and leave to dry for
24 hours. Refit filters only
when completely dry.
- 6 -
gB
Microfilter exhaust filter*