Lanaform WBPM-110 Bedienungsanleitung Seite 8

Note
01 The clock format could be set by user.
02 Table 2-1 instructs the conversion relations
between 24 hour format and 12 hour format.
Table 2-1
24 HOUR 12 HOUR
FORMAT FORMAT
0:00 12:00 AM
1:00 1:00 AM
2:00 2:00 AM
3:00 3:00 AM
4:00 4:00 AM
5:00 5:00 AM
6:00 6:00 AM
7:00 7:00 AM
8:00 8:00 AM
9:00 9:00 AM
10:00 10:00 AM
11:00 11:00 AM
03 Connecting The Cuff To The Monitor
The cuff is attached to the monitor when it is pack-
aged. Should the cuff become unattached, align the
two plugs and four brackets of the cuff with the
plug sockets and bracket sockets of the monitor
and press the cuff to the monitor until the plugs
and brackets are securely attached.
8 · 202104LA090207003 · 09/02/21
24 HOUR 12 HOUR
FORMAT FORMAT
12:00 12:00 PM
13:00 1:00PM
14:00 2:00 PM
15:00 3:00 PM
16:00 4:00 PM
17:00 5:00 PM
18:00 6:00 PM
19:00 7:00 PM
20:00 8:00 PM
21:00 9:00 PM
22:00 10:00 PM
23:00 11:00 PM
04 Applying The Cuff
a Place the cuff around a bare wrist 1-2cm above
the wrist joint on the palm side of the wrist.
b While seated, place the arm with the cuffed
wrist in front of your body on a desk or table
with the palm up. If the cuff is correctly placed,
you can read the LCD display.
c The cuff must be neither too tight nor too loose.
Note
d Please refer to the cuff circumference range
in "SPECIFICATIONS" to make sure that the
appropriate cuff is used.
e Measuring on left arm each time.
f Do not move your arm, body, or the moni-
tor and do not move the rubber tube during
measurement.
g Stay quiet, calm for 5 minutes before blood
pressure measurement.
h Please keep the cuff clean. Clean the cuff
by wet soft cloth and mild detergent if the
cuff becomes dirty. Do not remove the cuff
from the monitor. Clean the cuff after the
usage of every 200 times is recommended.