Lanaform WBPM-110 Bedienungsanleitung Seite 11

Classification of blood
pressure for adults
Level 3: acute
hypertension
Level 2: intermediate
hypertension
Level 1: mild
hypertension
Normal high
Normal
Optimum
10 Technical Alarm Description
The monitor will show 'HI' or 'Lo' as technical alarm
on LCD with no delay if the determined blood pres-
sure (systolic or diastolic) is outside the rated range
specified in part SPECIFICACIONS. In this case, you
should consult a physician or check if your opera-
tion violated the instructions.
The technical alarm condition (outside the rat-
ed range) is preset in the factory and cannot be
adjusted or inactivated. This alarm condition is
assigned as low priority according to IEC 60601-1-8.
The technical alarm is non-latching and need no
reset. The signal displayed on LCD will disappear
automatically after about 8 seconds.
≥180 ≥110 3
160-179 100-109 2
140-159 90-99 1
130-139 85-89 N
120-129 80-84 N
<120 <80 N
Troubleshooting (1)
PROBLEM POSSIBLE CAUSE
The cuff position
was not correct or
i twas not prop-
erly tightened
Body posture
was not correct
during testing
Speaking, arm or
body movement,
angry, excited
or nervous dur-
ing testing
Irregular heart-
beat (arrythmia)
Troubleshooting (2-1)
PROBLEM POSSIBLE CAUSE SOLUTION
LCD shows Low Battery
low battery
symbol
LCD Pressure sys-
shows "ER 0" tem is unstable
before meas-
urement
LCD Fail to detect
shows "ER 1" systolic pressure
LCD Fail to detect di-
shows "ER 2" astolic pressure
SOLUTION
Apply the cuff cor-
rectly and try again.
Review the "BODY
POSTURE DURING
MEASUREMENT"
sections of the
instructions
and re-test
Re-test when
calm and without
speaking or mov-
ing during the test
It is inappropri-
ate for people with
serious arrthyth-
mia touse this
Electronic Sphy-
gmomanometer
Change the
batteries
Don't move
and try again
202104LA090207003 · 09/02/21 · 11