Troubleshooting; Possible Cause - Scheppach CID150-20ProS Original Bedienungsanleitung

15. Troubleshooting

The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault

Possible cause

Battery empty
Battery defective
Device does not start
On/off switch defective
Motor defective
Battery empty
Motor stops during
Battery not inserted correctly
operation
Battery defective
Battery depleted
Reduced power
Battery not fully charged
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedy
Charge battery
Check the battery, have it repaired by a certified electrician
if necessary
Repair by an authorised service centre
Repair by an authorised service centre
Charge battery
Re-insert battery
Clean contacts, replace original battery
Replace battery
Charge battery
GB | 21