Selecting The Audio Settings; Movie" Audio Settings; 3D" Audio Settings; Dialog" Audio Settings - Silvercrest SSB 70 C3 Bedienungsanleitung Und Sicherheitshinweise

9.4.4 Selecting the audio settings

The sound bar has 4 pre-set audio settings. Press the relevant button (21, 22, 24, 25) to select the audio settings you want. The audio settings selected are shown
as follows on the LED display (1):

9.4.5 "MOVIE" audio settings

Select these audio settings to select the sound settings to play back e.g. films or documentaries.

9.4.6 "3D" audio settings

Select these audio settings to give the current playback a virtual 3D surround sound.

9.4.7 "DIALOG" audio settings

Select these audio settings to select the sound settings for voice playback. This setting is recommended for news programmes, among others.

9.4.8 "MUSIC" audio settings

This setting optimises the sound settings for music playback.

10. Cleaning

Switch the device off and unplug it from the mains. To clean it, use a soft, dry cloth. Never use any solvents or cleaners and never an abrasive sponge. Otherwise
the sound bar housing can be damaged.

10.1 Storage when not in use

If the sound bar is not to be used for an extended period, store it in a clean, dry and cool place. Also remove the batteries from the remote
control to prevent any leaking.

11. Troubleshooting

The sound bar does not power on.
•
Check that the mains plug is correctly inserted into a mains socket. Connect it properly if not.
•
Check whether the used power socket is alive. If necessary, test the device in a different socket that you are certain is working.
No sound
•
Check that the correct mode has been selected. Select the correct mode.
•
Check the playback volume on the sound bar and the connected playback device.
•
In HDMI ARC and OPTICAL mode: If your audio source supports multi-channel playback, you need to switch it to "PCM Stereo" before getting started, as
the sound bar will otherwise be unable to output sound. Please refer to the user manual for your audio source.
•
In "HDMI ARC" mode: Check that the HDMI(ARC) cable (C) is correctly inserted into the HDMI ARC jack (9) on the sound bar and the corresponding HDMI
ARC connection on the external sound source, e.g. TV set. On a "normal" HDMI connection, the TV set can only receive video and audio signals, but not
transmit them.
•
In "AUX IN" mode: Check that the adapter cable (E) is correctly inserted into the AUX IN jack (11) on the sound bar and the Cinch output on the external
playback device. Also check the volume setting of the external playback device connected via the adapter cable (E).
•
In "Optical" mode: Check that the Toslink cable (D) is correctly inserted into the optical digital input (10) of the sound bar and the corresponding jack on the
external playback device.
•
In "USB" mode: Check that your USB playback device is formatted with theFAT32 file system and correctly connected and that there are suitable playback
files on it. Suitable file formats: MP3 and WAV.
Cannot control the sound bar with the remote control
•
The remote control batteries are low or empty. Replace them with new batteries of the same type.
•
The distance between the sound bar and the remote control is too great. Move them closer together.
Playback via Bluetooth ® does not work
•
On your smartphone / tablet, check if there is a Bluetooth
Audio setting LED display
CINE
MOVIE
3d
3D
dIA
DIALOG
SONG
MUSIC
® connection established to the SSB 70 C3 sound bar. If necessary, repeat the pairing.
SSB 70 C3
English - 25