Connecting the 2.1 speaker system
Proceed as follows:
1. Connect both satellite loudspeakers
the "SPEAKERS OUTPUT" socket on the underside of the sub-
woofer
.
2. Connect the subwoofer
audio cable
more information about this, read the audio device documentation.
3. Insert the mains cable plug
socket.
The 2.1 speaker system is then ready for operation.
Operation
Before switching on the 2.1 speaker system always ensure that
the "VOLUME" control knob on the subwoofer is set to "low". Oth-
erwise a sudden, high input level could damage the speakers.
To this purpose turn the top control knob ("VOLUME") on the sub-
woofer
as far as possible in an anti-clockwise direction (
position).
1. Switch the 2.1 loudspeaker system on with the mains switch
The blue LED indicator
2. Switch on the audio device (computer or MP3 player). For more
information about this, read the audio device documentation.
3. Adjust the volume of all speakers with the "VOLUME" control knob.
4. Adjust the high and midrange levels with the "TREBLE" control
knob and the low range level with the "BASS" control knob.
with the "AUDIO INPUT" socket and the
to the audio device (computer, MP3 player). For
below the control knob lights up blue.
with the speaker cable
into an easily accessible mains
Silvercrest 2.1-Speaker System SP2010
English
to
"low"
.
9