Permits / Conformance; Service Centers - ABS AVALANCHE AIRBAG SYSTEM Gebrauchsanleitung

Cartridges:
Carrying system:
Operating temperature:
12.4 Permits and conformance
Manufacturer: ABS Peter Aschauer GmbH
Country of origin: Germany
36
Type: ABS Avalanche Airbag System
The nature of the materials and the kind of workmanship used
for the development of the ABS Avalanche Airbag System are
based on the standard values of comparable usage require-
ments. These standard values form the requirement profile for
the material and operating tests conducted by TÜV Süd Product
Service GmbH within the Federal Consumer Product Safety Act,
according to PPE directive 89/686 EWG as well as the CE guide-
lines. Yet during an avalanche incident there could be forces
and circumstances, which will exceed these standard values.
We would therefore explicitly point out that the ABS Avalanche
Airbag System in its entirety and in parts (airbag material,
attachments, backpack, etc.) cannot withstand all possible
demands which will arise during an avalanche incident.
Are made from highly durable materi-
als with an allowable pressure of more
than 300 bar (4400 psi).
Depending on the model, the cartrid-
ges comply with the guidelines of the
EG or DOC / TC for North America.
Complies with the TÜV requirements
for extreme operational demands. The
tensile strength for all weight bearing
straps equals 3000 N (674lbf).
From -40ºC to +50 ºC (-40F to +122F)
TÜV Süd Product Service GmbH, Ridlerstr. 21,
D-80339 München, Prüfstellennummer 0123.
Die ABS Peter Aschauer GmbH is a certified company according
to ISO 9001:2000 standards.
The ABS System is Made in Germany.

12.5 Service centers

The ABS customer service centers for the different countries are
listed under contact on our website www.abs-airbag.com
English