Werbung
PROGRAMMING
Before programming you must:
Press the button
PROG on the back of
the push-button panel using a small
screwdriver; the displays shows "Pro-
gramming / type: ".
Dial the programming code (see table
1) and press
to confirm.
Once you have programmed each
code, press the button
PROG again;
the display shows "FARFISA / dial the
number or press
" or the text set
during the programming phase (see
"Personalisation of display initial
text").
Table 1
Programming codes
00 Entry of codes for door lock
01 Entry-modification-deletion of
names
02 Language selection
03 System programming
04 Entry of display initial text
05 Loading names from PC
06 Ordering names
10 Address door station (PE)
11 Address button P1
30 Operations with door keeper
exchangers
Entry of codes for door lock (code
00)
Enter the programming mode and insert
code
00 to access the "entry of codes
for door lock" mode; the display shows
"PASSWORD 0 /
".
Dial the first opening code on the key-
pad, for example 7890; the display
shows "PASSWORD 0 / 7890".
Press
; the display shows
"PASSWORD 1 /
".
Dial the second opening code on the
keypad, for example 1234; the display
shows "PASSWORD 1 / 1234".
Press
; the display shows
"PASSWORD 2 /
".
Repeat the operations to insert max.
16 codes; when you press the button
to confirm the sixteenth code
(PASSWORD 15) the display shows
"Programming / type: ".
Continue by entering the code of a
new programming function or press
the button
PROG to exit.
Modifying a code
To change the previously saved code
you must enter the programming mode
and then:
select the programming code 00;
press the button
until the code you
want to modify is displayed;
press
to go to the code you want to
modify;
enter the new code on the keyboard
and then press the button
repeat the operation for all the codes
you want to modify;
press the button PROG to exit the pro-
gramming mode.
Deleting a code
To delete the previously saved code you
must enter the programming mode and
then:
select the programming code 00;
press the button
until the code you
want to delete is displayed;
press the button
and then
repeat the operation for all the codes
you want to modify;
press the button PROG to exit the pro-
gramming mode.
Entry / modification / deletion of
names (code 01)
The digital keyboard TD2100PL has an
alphanumerical display with 32
characters that displays the user name
and extension number (28 characters
are used for user name and the last 4
characters on bottom right are used for
extension number). To save them, you
must follow the procedure illustrated
below. The name must be entered
starting from the first character on top left
and the last digit of the extension number
must be entered in the last position on
bottom right, otherwise the number will
not be saved (see "deletion of names").
After you have entered all the names, the
system will automatically arrange them
in alphabetical order.
Example
YES
Function of buttons when entering
or modifying a name
Hold this button pressed to scroll the
list of existing names
Hold this button pressed to move the
cursor to the name characters
Hold this button pressed to scroll
down the list of characters
Hold this button pressed to scroll up
the list of characters
When searching for characters, the
display shows upper-case letters, low-
case letters, numbers, special characters
and space in a sequence.
;
Entry of names
Press the button
programming mode.
Enter the code 01 and press the but-
ton
; the display shows the first name.
The display is empty if no codes are
programmed.
Press
for the first cell; press
second cell; press
character for the second cell; continue
until you have entered the complete
;
name with code. Press
have entered the number in the last
cell on bottom right; the display shows
"STORE USER / YES
to confirm; press
name.
If confirmed, the display shows the
second name. The display is empty if
no names are programmed.
Press the button
firm the last name to insert. The dis-
play shows "waiting" and an automatic
status bar. Normal operation is re-
stored after a few seconds and the
display shows the initial text (see "Op-
eration").
Notes. Once you have entered 250
names the display shows "waiting" and
an automatic status bar. After a few
seconds the display shows "Program-
ming / type: " and you can continue with
programming or press the button PROG
to exit.
You can enter 2 or more names with the
same call number (i.e. different family
names in the same apartment).
NO
PROG to enter the
or
to select the character
to go to the
or
to select the
after you
NO"; press
to modify the
PROG again to con-
13
Mi 2382
Werbung
