Status Indications - Toshiba Stor.E D10 Handbuch

STOR.E D10
Component
USB port
DC-IN
Stand
Design and specifications are subject to change without prior
NOTE
notice.

Status indications

Light status
Flashing
Solid
Flashing rapidly
EN-8
Description
Connection point for the provided
USB cable, used to connect your
STOR.E D10 to your computer.
Note: Use either a USB cable or an
eSATA cable to connect the drive to
your computer, not both.
Connection point for the provided AC
adaptor.
Use to position the drive vertically.
Indicates
The connected computer is reading
or writing data on the drive.
The drive is powered on but is not
currently being accessed.
An error has occurred. Disconnect
and then re-connect the drive to your
computer. If the condition is not
cleared, contact Toshiba support.
User's Manual