Toshiba Stor.E D10 Handbuch Seite 10

STOR.E D10
3. Connect your STOR.E D10 to your computer via USB
Never connect your STOR.E D10 to a computer with both a
CAUTION
USB cable and an eSATA cable at the same time. Doing so
could damage the drive and/or the computer and may cause
data loss.
Connect the drive to your computer using the provided USB
cable. Turn on your computer, if it is not already on.
4. Turn on your STOR.E D10
Press the power button on the back of your STOR.E D10 to turn
on the power.
After you connect and turn on your STOR.E D10, the drive will
mount to your computer. You are now ready to use your
STOR.E D10.
EN-10
(Sample Illustration) Connecting the USB cable
Power button
(Sample Illustration) Turning on the power
USB port
User's Manual