Regulatory Information; Ce Compliance; Working Environment - Toshiba Stor.E D10 Handbuch

Regulatory information

CE compliance

This product is CE marked in accordance with the requirements of
the applicable EU Directives. Responsible for CE marking is
Toshiba Europe GmbH, Hammfelddamm 8, 41460 Neuss,
Germany. A copy of the official Declaration of Conformity can be
obtained from following website: http://epps.toshiba-teg.com

Working Environment

The Electromagnetic Compliance (EMC) of this product has been
verified typically for this product category for a so called
Residential, Commercial & Light Industry Environment. Any other
working environment has not been verified by Toshiba and the use
of this product in these working environments is maybe restricted or
cannot be recommended. Possible consequences of the use of this
product in non verified working environments can be: Disturbances
of other products or of this product in the nearby surrounding area
with temporarily malfunction or data loss/corruption as result.
Example of non verified working environments and related advices:
Industrial environment (e.g. where 3-phase 380V mains is being
used mainly): Danger of disturbances of this product due to
possible strong electromagnetic fields especially near to big
machinery or power units.
Medical environment: The compliance to the Medical Product
Directive has not been verified by Toshiba, therefore this product
cannot be used as a medical product without further verification.
The use in usual office environments e.g. in hospitals should be no
problem if there is no restriction by the responsible administration.
Automotive environment: Please search the owner instructions of
the related vehicle for advices regarding the use of this product
(category).
Aviation environment: Please follow the instructions of the flight
personnel regarding restrictions of use.
User's Manual
STOR.E D10
EN-17