Touch Control Sensor Fields; Residual Heat Indicator - AEG 88031KF-N Benutzerinformation

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Displays
-
+ digit

Residual heat indicator

WARNING!
Risk of burns from residual heat. After being switched off, the cooking zones need some
time to cool down. Look at the residual heat indicator
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of
the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
Sensor field
On / Off
Child lock
STOP+GO
Power
Timer
Increase settings
Reduce settings
Display
Keep Warm settings
Heat settings
Auto Warm-up
Fault
Pan detection
Residual heat
Child safety device
Power
Automatic Switch off
Description of the appliance
Function
Switches appliance on and off
Locking control panel for children
To switch the Keep Warm setting on/ off
Switching the power function on and off
Timer selection
To increase Timer time
To reduce Timer time
Description
The cooking zone is switched off
Keep Warm / STOP+GO function is switched on
To set heat settings
The Auto Warm-up function is switched on
Malfunction has occurred
Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Cooking zone is still hot
Lock/Child safety device is set
Power function is switched on
Switch off is active
.
23