Service Data - AEG MSC2544S-M Benutzerinformation

34 www.aeg.com
11.1 What to do if...
Problem
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The lamp does not
operate.
The display shows
There is sparking in
the cavity.
There is sparking in
the cavity.
The turntable set
makes scratching or
grinding noise.
The appliance stop to
operate without a
clear reason.

11.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The appliance is deactivated.
The appliance is not plugged in. Plug in the appliance.
The fuse in the fuse box is
blown.
The door is not closed properly. Make sure that nothing blocks
The lamp is defective.
. The Child Safety Lock is active.
There are metal dishes or dishes
with metal trim.
There are metal skewers or alu-
minium foil that touches the in-
terior walls.
There is an object or dirt below
the glass cooking tray.
There is a malfunction.
Remedy
Activate the appliance.
Check the fuse. If the fuse blows
more than one time, contact a
qualified electrician.
the door.
The lamp has to be replace.
Deactivate the Child Safety
Lock. Hold
Remove the dish from the appli-
ance.
Make sure that the skewers and
foil does not touch the interior
walls.
Clean the area below the glass
cooking tray.
If this situation repeats call the
Authorised Service Center.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the appliance. Do not remove the
rating plate from the appliance.
........................................
........................................
........................................
for 3 seconds.