Technical Specifications - Gastrodomus VIP210RG Aufstellung-Anwendung-Wartung

Positioning of components and accessories
The grills are supported by 4 adjustable supports. Position the grill supports
inside the appliance in the most suitable position for the use.
Maximum single grid/bottom capacity: 20Kg.
The weight must be evenly distributed on the grill/bottom. At max. capacity
weight, an eventual slight deformation of the grill is absolutely normal.
Maximum total
AKE360FG) – 160Kg (AKE750-1000-1200RG-AKE750-1000RS-AKE800FG).
Note: Never move the appliance with products inside the cell. Be sure to
empty the appliance of any product before moving it.
Electrical connection
Make sure that the electrical supply system complies with applicable laws.
The power cord must be stretched (avoid twisting or overlapping) in a position
not exposed to possible crush, cuts or tampering, and should not be put near
liquids or water and heat sources. If the power cord is damaged, have it
replaced immediately by qualified personnel. Always avoid the use of
electrical adapters.

5. TECHNICAL SPECIFICATIONS

Absorbed power and dimensions
The absorbed power, the external and internal dimensions and other technical
specifications for the various models are indicated in the table from chapter
11.
Noise and vibration
The sound level of the equipment fitted with an onboard condensing unit does
not exceed 70dB. Under normal conditions the equipment does
not generate vibrations which affect the surrounding environment.
6. USE
Activation
The appliance is activated by a thermostat or a digital control unit (depending
on the model). The operations available to the user are:
Startup/shutdown of the unit (fig. 1)
Models AKE210RG – AKE250RG – AKE320RG – AKE370RG – AKE750RG –
AKE1000RG – AKE750RS – AKE1000RS – AKE360FG:
To turn on the appliance, connect the power plug. To turn off the appliance,
disconnect the power plug.
appliance capacity:80Kg
(AKE210-250-320-370RG-
10