Generic Soho Handbuch Seite 32

Exhaust inspection
Inspect the mounting bolts and nuts whether it loose, start the engine, and check if has exceptional
noises.
Coolant inspection and supplement
Coolant is used to keep the water cooled engine works in a proper condition, make sure that enough
coolant in water tank before driving.
The engine coolant is essential for Water-cooled engine, if the engine running at high speed without
engine coolant will cause great harm.
Even damage Piston, cylinder, and cylinder head. Therefore, check coolant level before driving and
add in time. A high degree of coolant from (1) the observation can be seen, vice liquid coolant water
tanks should not be less than Icon (3) or more than Icon (2).
Coolant supply
Hold up the main stand, removing the front mask on the cover (the front ventilation grid), rotation off
two bolts with fixed inlet, pullout the outlet gently. Press tank cover and let it counterclockwise rotation
,and take off water tanks , inject coolant slowly (recommended attendant funnel).When add coolant,
please screw the bolt down, in order to the gas inside can be fully discharged (finish that, screw the
bolt on). When add coolant for the expansion water, the at least to reach to UP scale. After that, fix
components in reverse order.
Warning
Just stopped the vehicle, due to high coolant temperature, and the internal pressure, it is easy to ex-
haust gas with high temperature. Do not open the tanks covered to prevent scalding, and not add water
until it cool down.
1
Sensor bolt
3
2
13