Pre-Riding Inspection - Generic Soho Handbuch

Pre-riding inspection

Steering bar inspection
Inspect steering bar whether swing loosely in every directions, whether are damaged and rotation
whether are tight.
Brake light inspection
Turn the main switch to position .Confirm if the brake light comes on while braking the lever. Inspect
and clean the brake light cover if any damaged or dirty.
Turning light inspection
Whether the lamp is bright while starting engine. Inspect chimney whether are damaged or dirty.
Tire inspection
Front tire: 280 kPa Rear tire: 280 kPa
If any tire is broken or exceeds the limits of tire groove depth, replace it with a new one.
Tires outside of specified pressures, will crack and wear, and will cause handlebar vibration, and could
result in poor brake performance.
Minimum groove depth
Front: 1,6 mm Rear: 3,2 mm
Speedometer inspection
Inspect speedometer if it is working normally.
Horn inspection
Turn the main switch to position and press horn button to check whether horn sounds.
Rearview mirror inspection
Inspect and adjust if angle of the rearview mirrors are proper.
12