After Drain Cleaning - Wohler Rm 300 Bedienungsanleitung

Operation
Fig. 12: Drain cleaning
6.5

After drain cleaning

34
Press the handle and the cable will start to
•
rotate.
NOTE!
As long as you press the handle, it is not possible
to move the cable forward or backward.
Release the handle and push the cable further
•
into the pipeline. Repeat this process until you
feel resistance. This means you have reached
the blockage.
• When the cable has moved into the pipeline
so far that the working bend is relieved, pull
the cable out of the machine and form a new
working bend.
ATTENTION!
If the movement is very stiff, rotate the cable
clockwise and anticlockwise so that it does not
jam during locking (clockwise rotation) and releas-
ing (anticlockwise rotation).
Make sure that the cable does not get wedged,
otherwise it will be damaged.
Pull the cable out of the tube and clean it with
•
water.
After using the machine, let it freely rotate for
•
2-3 minutes.
• Flush and dry the cable and augers. Lubricate
them with oil and keep them in a dry place to
prevent rusting.