NARDA SignalShark 3330 Kurzanleitung Und Sicherheitshinweise Seite 74

Mounting preparations at ground level
Mounting the U profiles and U brackets to the Outdoor Unit
1.
Fig. 12: Pre-assembly of U profiles and U brackets
1. Connect two of the U profiles each with an U bracket using two hexagon
bolts, spring washers and hexagon nuts. The bolt heads must be on the
inner side of the U brackets.
2. Screw the U brackets onto the side walls of the device housing. For each
bracket, use three cylindrical head screws and spring washers on each
side.
74
2.
SignalShark 3330 Outdoor Unit
Narda