Commissioning; Mounting And Installation - NARDA SignalShark 3330 Kurzanleitung Und Sicherheitshinweise

3.3

Commissioning

Damaged devices or accessories
Commissioning of a damaged device or accessory could lead to
significant measurement errors and consequential damage.
 After unpacking, inspect the Outdoor Unit and all accessories for
damage in transit. Do not put a damaged device into operation.
 Check the Outdoor Unit and its accessories regularly for damage.
Cracks or fractures in the housing suggest possible damage on the
inside and could possibly lead to false measurement results.
 In the event of a defect or suspected anomalies, take the Outdoor Unit
out of operation. Contact your sales partner. Contact addresses can be
found online at http://www.narda-sts.com.
3.4

Mounting and installation

Use of staging equipment
Staging equipment, such as ladders, scaffolds or platforms, could
collapse or tip over. There is also the risk of the staging equipment
slipping. This could lead to serious or fatal injuries as well as damage
to the device.
 Anchor the staging equipment firmly in the ground.
 Temporarily elevated work positions must be used exclusively by
instructed and specially trained personnel.
 Use scaffolds only after inspection and approval by a competent person.
 Have rope access and positioning carried out only under the oversight of
a rope access supervisor.
 Use lifting platforms only after intensive instruction.
 Ensure safe access to elevated work positions (stairs, ladders, rope
access and positioning).
 Use ladders only for work of short duration.
 If ladders are used, also use personal protective equipment against
falling if necessary.
 Use personal protective equipment against falling if the use of a fall
restraint or fall arrest system is not possible.
50 SignalShark 3330 Outdoor Unit
Narda