Panasonic S-36PU2E5B Installationsanleitung Seite 25

<Procedure of CZ-RTC5A, CZ-RTC5B>
Stop the system before performing these steps.
1 Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
2 Press the or
If you wish to see the next screen instantly, press the
or button.
Select "8. Detailed settings" on the LCD display and
press the button.
The "Detailed settings" screen appears on the LCD display.
3 Select the "Unit no." by pressing the
button for changes.
4 Select the "Code no." by pressing the
button.
Change the "Code no." to "
button (or keeping it pressed).
=91
, and buttons
button to see each menu.
or
or
" by pressing the
Electrical component box
=90
=93
=92
5 Select the "Set data" by pressing the
button.
Select one of the Setting Data "YYYY" by pressing the
or
Then press the
Flap position
* Setting data "
Setting data
or
NOTE
The flap swings during the operation under "Setting
the Flap Separately".
At this time, the unselected flaps are moved to the
position
1
6 Press the
The "Exit detailed settings and restart?" (Detailed setting-
end) screen appears on the LCD display.
Select "YES" and press the
25
XX YYYY
button.
button.
XX
YYYY
1
2
3
4
5
"
Flap position during operation
Without separate setting
Swing
Move to position and stay
1
Move to position and stay
2
Move to position and stay
3
Move to position and stay
4
Move to position and stay
5
.
button.
button.
or