Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Modes
Power ON/OFF
Connect the grounded three-prong wall power plug into the power socket. A beep will
sound and the POWER LED indicator
Press the power button on the device
When switching on the device for the first time, it automatically starts in FAN mode.
When switching on the device, when it already has been powered on, it will start in the last
selected mode.
To switch off the device, press the power button on the device
again, until the display
Operation mode
The device has 4 selectable mode functions: Cool – FAN – DRY (Dehumidifying)° – Sleep.
Press the mode button on the device
or FAN mode
on the remote control.
I
Cooling mode
Press the mode button on the device
on the digital control panel lights up.
3
Select the desired temperature by pressing the increase
device.
Or select the desired temperature by pressing the increase
the remote control.
The temperature can be set between 16°C and 32°C
Note! The device will automatically stop cooling when the room temperature is lower
than the selected temperature!
FAN Speed
There are 2 selectable FAN speeds; High speed & low speed.
Repeatedly press the fan SPEED button on the device
has been selected. Or press
control.
While pressing the required FAN speed, the LED display
speed.
To control the vertical (left/right) and horizontal direction (up/down) of the airflow, adjust the
louver in the air outlet
FAN mode
You can ventilate your room. In this mode the air is circulated, creating a 'breeze feeling',
but the room will not be cooled.
Press the mode button on the device
on the digital control panel lights up.
3
You can select the required FAN speed as described in "FAN speed"
Celsius / Fahrenheit
To switch between degrees Celsius & Fahrenheit, press and hold the MODE button on the
for 3 seconds, or press
device
2
from C to F (±42 degrees difference).
1
1
on the digital control panel switches off.
8
or the desired cool mode
2
or remote control
2
for high speed FAN or
E
by hand.
2
or remote control
2
K
on the remote control until the display
on the digital control panel lights up.
or remote control
9
until the required FAN speed
7
for low speed FAN on the remote
F
5
EN 10
to switch on the device.
A
or remote control
1
G
, dehydration mode
G
until the COOL LED indicator
or decrease
button on the
4
B
C
or decrease
will indicate the selected
I
until the FAN LED indicator
8
A
H
button on
is switched
Werbung
Inhaltsverzeichnis
Fehlerbehebung
