Switching Between Kilometres And Miles; Setting The Date; Setting The Time - Ansmann Rm7.0 Originalbetriebsanleitung

Save the value you have set and exit the setup menu by briefly pressing
button (T5) on the control unit.

11.3 SWITCHING BETWEEN KILOMETRES AND MILES

When the system is switched off, change the speedometer display from km/h
(kilometres per hour) to mph (miles per hour) by simultaneously pressing but-
tons (T1) and (T3) on the display (> 2 sec.). It can be set back to km/h in the
same way. The new setting is shown directly on the display.

11.4 SETTING THE DATE

When the system is switched on, change to the ‚DATE' display by briefly pres-
sing button (T3) one or more times. You can then set the date by pressing
button (T3) longer (> 2 sec.). Now the day flashes in the date display. The day
can be changed by pressing buttons (T4) and (T6). Briefly pressing button
(T5) moves you to the month setting (the month flashes). The month can
be changed by pressing buttons (T4) and (T6). Briefly pressing button (T5)
moves you to the year setting (the year flashes). The year can be changed by
pressing buttons (T4) and (T6). Save the date you have set and exit the setup
menu by briefly pressing button (T5).

11.5 SETTING THE TIME

When the unit is switched on, change to the ‚CLOCK' display by briefly pres-
sing button (T3) one or more times. You can then set the clock by pressing
button (T3) longer (> 2 sec.). Now the hours in the clock display flash. The
hours display can be changed by pressing buttons (T4) and (T6). Briefly pres-
sing button (T5) moves you to the minutes setting. The minutes display can
be changed by pressing buttons (T4) and (T6). Save the time you have set and
exit the setup menu by briefly pressing button (T5).
www.ansmann.de
39