Battery Indicator; Start-Up; Switching On/Off - Ansmann Rm7.0 Originalbetriebsanleitung

The battery has a capacity indicator for checking the charge level. This
is done by briefly pressing the button on the capacity indicator. Then the
charge level is displayed for a short time with LEDs. In driving mode the
battery capacity can be read from the display.
0 – 10%
11 – 30%
31 – 50%
51 – 70%
71 – 90%
91 – 100%

11. START-UP

As soon as the battery is charged and firmly latched in the holder, the drive
system is ready for use.

11.1 SWITCHING ON/OFF

The drive system is switched on by briefly pressing the top button (T1)
on the display. If the bicycle is not used, the drive and display switch off
automatically after 5 minutes. When switched on, it can also be switched
off manually by pressing the top button (T1) on the drive display for longer
(> 2 sec.).he control unit is used to switch on the electric drive or energy
recovery.

BATTERY INDICATOR

100% 80% 60% 40% 20%
LED 1 flashes
LED 1 on
LED 1 - LED 2 on
LED 1 - LED 3 on
LED 1 - LED 4 on
LED 1 - LED 5 on
www.ansmann.de
DISPLAY
Bar 1 flashes
Bar 1 on
Bar 1 - 2 on
Bar 1 - 3 on
Bar 1 - 4 on
Bar 1 - 5 on
37