Thinning Out Hair - Grundig WET & DRY MT 8240 Bedienungsanleitung

OPERATION ______________________________
C
5
Press the button to switch off the
appliance after use.
6
After use, remove the comb attach-
4 6
ment to
ing tab at the back and lifting the
comb attachment.

Thinning out hair

1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
7 (width 30 mm), put comb attachment
4
(width 2 mm) carefully at the top
and press down until it clicks into place.
C
3 Press the button to switch on the
appliance and start thinning out
your hair.
C
4 Press the button to switch off the
appliance after use.
Skin close cut of body hair
Please use the body hair trimming
1
head .
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
top and press down until it clicks into
place.
22 ENGLISH
by pressing the lock-
A
(width 38 mm) or
1
carefully at the
3
Press the
appliance and start trimming your
body hair.
Notes
Do not apply strong pressure when
7
cutting, as this may cause skin injury.
Clean the body hair trimming head
7
1
with the cleaning brush supplied.
B
4
Press the
appliance after use.
Trimming body hair to a
certain length
Please use the body hair trimming head
1
and attachment comb
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
top and press down until it clicks into
place.
3 Push the attachment comb
fully and firmly onto the rounded
rear half of the cutting head from
above and let it click into place.
B
Note
To adjust the attachment comb
7
attach it in one of the three side rails
of the body hair trimming head
The nearest rail to the trimming
blades will adjust the attachment to
9 mm, the middle rail to 5 mm and
the outer rail to 2 mm.
C
button to switch on the
C
button to switch off the
2
.
1
carefully at the
B
2
care-
2
,
1
.