SAFETY AND SET-UP ______________________
Never place the appliance, attachments,
■
power cord or plug on hot surfaces such as
gas or electric burners or hot oven surfaces
and never use with hot liquids or food. Let hot
food and liquids cool down to min. 80°C or
less, before using the appliance.
Do not use the appliance for anything other
■
than its intended use.
Never switch on the appliance for longer
■
than necessary for processing the food.
Never use the appliance with damp or wet
■
hands.
Operate the appliance with delivered parts
■
only.
The appliance has been designed for process-
■
ing food and liquids in common household
quantities.
Do not use the appliance if the blades are
■
damaged or show signs of wear.
Always use the appliance on a stable, lat,
■
clean and dry surface.
Make sure that that there is no danger that
■
the power cord could be accidentally pulled
or that someone could trip over it when the
appliance is in use.
Position the appliance in such a way that the
■
plug is always accessible.
A spatula may be used to remove the food
■
from the measuring beaker and chopping
bowl. Make sure, the appliance is switched
of before doing this.
This appliance is not suitable for crushing
■
ice or for dry or hard foods as this to quickly
cause the blades will become dull.
Remove bones and stones from food to
■
prevent the blades and the appliance from
becoming damaged.
In order to reduce the risk of injury, never set
■
the blades of the appliance onto the base, if
the chopping bowl is not seated properly.
Make sure that the lid is seated properly on
■
the chopping bowl before you switch on the
appliance.
16 ENGLISH
To prevent overheating do not use the appli-
■
ance continuously for more than 10 seconds,
in order to prevent overheating.
This appliance is intended for short periods of
■
use and may not be used for longer than 1
minute at a time. Let the appliance cool down
suiciently after use.