Connecting The Electrical Components - Hammerbacher VXDKB Serie Betriebsanleitung

7
④

Connecting the electrical components

Before putting the table into operation, screw all components tightly together, then carry out
"Reset"!
Please use the enclosed cable holder (G) and fix it with screw (E), so that no cables hang freely under
the desk. Keep in mind that the desk which you are assembling is height adjustable. The cables of
the electrical components must be able to freely follow the movement of the desk
8
The control unit with the "Gyrosensor" must be in a horizontal position and screwed tight!
• Please carry out "Reset" now.
• Carry out a "Reset" at regular intervals - at least 1 x per month.
⑧ ⑨
⑤
⑤
10x
Ⓔ
10x
Ⓖ
Before putting the table into operation, screw all
components tightly together, then carry out "Reset"!
10x Ⓔ 10x Ⓖ
3,5 x 16
!
19
VXDKB