Operation And Indicators; Troubleshooting - Hammerbacher VXDKB Serie Betriebsanleitung

Operation and indicators

Observe the regulations and safety instructions in particular:
• Do not leave children unsupervised with the workstation. Children may be unaware of
the dangers presented by the workstation. They would be in serious danger of injuring
themselves, possibly even with fatal consequences.
• The maximum time of 2 minutes of the working table must not be exceeded.
• Make sure there is ample space to avoid collisions if there are objects on the work surface
such as computers or computer peripherals.
Indicators
• Leave the immediate surroundings of the workstation frame at once if it starts to move
spontaneously. Under no circumstances attempt to operate the workstation frame. Have
the workstation frame repaired by specialists.
• Refrain from using the workstation until it has been successfully repaired.
• Stop using the workstation frame at once if you notice anything unusual (strange sounds,
smoke, etc.). Have the workstation repaired by specialists. Refrain from using the
workstation until it has been successfully repaired.
• Stop using the workstation at once if its safety features fail to work as they should.

Troubleshooting

Problem
Height adjustment
does not work
If your problem couldn´t be solved or is not listed here, please contact your customer
service for further advise.
Possible cause
Cables or connectors defective.
If cables and connectors have been
checked a possible cause could be a
defective UP and DOWN switch.
Error in the control unit.
Solution
Check cables for damages and if
necessary replace them. Power in order?
Replace UP and DOWN switch.
Initialize restart.
9
EN VXDKB