Putting Into Operation; Periodical Maintenance - IARP KREA Serie Gebrauchs- Und Bedienungs Anleitungen

THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVI-
RONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.

PUTTING INTO OPERATION

Check that the voltage on the identification plate is
the same as that of the network.
THE ELECTRICAL SUPPLY LINE TO WHICH
THE REFRIGERATOR WILL HAVE TO BE CON-
NECTED IS TO BE PROTECTED BY A VERY SENSITI-
VE MAGNETOTHERMAL DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED TO
THE GENERAL EARTHING PLANT.
The manufacturer disclaims all responsability for any damage
to people or things due to incorrect observance of this rule.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords, adapters
or multiple socket outlets to connect the counter.
DIRECTLY connect the equipment to the mains.
Warning!
No more than two units should be connected
to one circuit protected by magnetothernic switch IGMD
After plugging, wait till the appliance reaches the right temperature before filling it; don't place the
product over the max. load level.

PERIODICAL MAINTENANCE

Any further adjustments on the refrigerator necessarily require the electric plug to be removed.
Check periodically the supply cable in order to detect any damage.
If the power supply cable is damaged, don't use the equipment and don't try to repair it: to prevent any
risk, it must be replaced by the manufacturer, by a member of the after-sales service staff, or anyway
by a person having similar qualifications.
In any case, none of the protective elements (the grill, the carter) must be removed by non qualified
staff. Absolutely avoid using the refrigerator without such protection.
The replacement of lamps must be carried out only by an Authorized Service Center.
The lamps have to be replaced by identical lamps only.
-16-