Geberit VOLEX Bedienungsanleitung Seite 36

EN
Maintenance interval
Regularly, before use,
at the start of the
working day
Authorised repair shops
The addresses of authorised repair shops can be requested from
the Geberit sales companies or found on www.geberit.com.
36
Maintenance work
▶
Check the Geberit pressing collar and
adapter jaw for externally visible defects
such as damage, material cracks,
patches of rust and other signs of wear. If
defects are present, replace the pressing
collar and adapter jaw or have the
defects repaired by an authorised repair
shop.
• Pressing collar:
– spray the pressing contour with
BRUNOX® Turbo-Spray® and clean
with a cloth
– remove deposits in the pressing
contour
– check that the collar joints and collar
segments can be moved easily. If
necessary, move the collar segments
multiple times until they are able to
move easily
• Adapter jaw:
– spray the entire adapter jaw with
BRUNOX® Turbo-Spray® and clean
with a cloth
– check that the jaw levers and jaw
joints of the adapter jaw can move
easily. If necessary, move the jaw
levers several times until they are able
to move easily
18014400957105675-1 © 01-2018
967.765.00.0 (01)