CSL 303506 Bedienungsanleitung Seite 10

place the expansion card with assembled hard drive into the top part of the
housing. Make sure that the slot of the expansion card is filled with the top
part of the housing.
8. Screw the base plate to the top part of the housing. Make sure that the
grooves for the screws are above the mounting screw.
9. Insert the expansion card properly into a PCIe slot of your motherboard.
The device is now ready for use.
Note: If the new hard drive is not shown directly in Explorer, make sure that you
make the correct settings under Disk Management.
10
English