Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Enabling the alarm
Press the "UP" button in the default screen. An alarm icon is subsequently
displayed next to the time. This means that the alarm is enabled. To disable alarm
1 and to enable alarm 2, press the "ALARM" button again. Pressing the "ALARM"
button again enables alarm 1 and alarm 2. Both alarm symbols are shown in the
display.
Both are disabled by pressing the "ALARM" button again. The symbols disappear
from the display.
Caution! Make sure that you have previously selected the desired days (1-5 and /
or 6-7) in alarm mode.
Switching off the alarm
When the alarm is activated at the configured time, the backlight also turns on
automatically. The alarm is active for 2 minutes before it turns off automatically.
Press the "SNOOZE/LIGHT" button to cancel the alarm. A snooze icon is shown in
the display. This means that the snooze function is activated and the alarm will go
off again in 5 minutes.
Press any button to switch off the alarm.
9. Stored data
Maximum and minimum temperatures
Press the "MAX/MIN" button to view the maximum indoor and outdoor temper-
ature, the maximum humidity, the maximum and minimum air pressure. "max"
appears on the display. Press the "MAX/MIN" button again to view the minimum
measured values. "MIN" or "MAX" is shown in the display. After about 6-7 sec-
onds, the current reading is displayed again.
Note: The min/max temperatures are measured from the total operating time of
the weather station. Press and hold the "MAX/MIN" button for about 3 seconds to
delete the stored maximum/minimum outdoor temperature readings.
26
English
Werbung
