Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Basic settings
Note: Pressing the "SNOOZE/LIGHT" button at the top of the housing
switches the backlight on. Please note that the base station does not
respond to 2 buttons at the same time. Therefore, it is advisable to press
only one button.
When supplying power from the mains, pressing the "SNOOZE/LIGHT"
button repeatedly changes the brightness levels of the backlight in steps.
Press and hold the "MODE" button in the default screen for about 5 seconds to
configure the basic settings. With the "UP" and "DOWN" buttons, you can change
the values accordingly.
By briefly pressing the "MODE" button in the time settings, you can confirm the
entry and proceed to the next option. In this way, you can change and customise
the settings in the following sequence:
• Year
• Date format
• Month
• Day
• Hour
• Minute
• 12/24 hour format
• Time zone - Note: If you set the time zone, for example, to + 01
and the weather station is actuated using the DCF-signal, then the
clock displays one hour later than the DCF-signal. Enable the time
zone by briefly pressing the "DOWN" button in the default screen.
"ZONE" is displayed next to the time.
• Language setting - To set the day on the display. The follow-
ing codes can be configured and selected using the "UP" and
"DOWN" buttons: GER (German), DAN (Danish), SPA (Spanish),
NLD (Dutch), FRA (French), ITA (Italian), ENG (English)
• Current weather - Displayed as a pictogram
• Unit of air pressure - Select between "inHg" and "hpa"
• Air pressure reading - You can obtain the current air pressure for
your location from the weather information on the Internet.
24
English
Werbung
