Sony SDM-HS74 Handbuch Seite 41

Symptom
Picture is fuzzy
Picture is ghosting
Picture is not centered or sized
properly (analog RGB signal only)
Picture is too small
Picture is dark
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
Monitor buttons do not operate
( appears on the screen)
The monitor turns off after a while
Resolution displayed on the menu
screen is incorrect
Displaying this monitor's information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
MENU
Example
INFORMATION
MODEL : SDM-HS74
SER . NO : 1234567
MANUFACTURED : 2004-52
Check these items
• Adjust the brightness and contrast (page 12).
• Adjust the pitch and phase (analog RGB signal only) (page 12).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Adjust the pitch and phase (page 12).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
the edges.
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer's resolution to the screen's resolution.
• Adjust the brightness using the BRIGHTNESS menu (page 12).
• Adjust the backlight (page 11).
• Adjust the brightness using the
• It takes a few minutes for the display to become bright after turning on the monitor.
• Adjust the pitch and phase (analog RGB signal only) (page 12).
• Adjust the pitch and phase (analog RGB signal only) (page 12).
• Adjust the color temperature (page 13).
• If the menu lock is set to ON, set it to OFF (page 15).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer's power saving setting to off.
• Depending on the graphics board setting, the resolution displayed on the menu screen
may not coincide with the one set on the computer.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS74, SDM-HS94, SDM-HS74P or SDM-
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Model name
Serial number
Week and year
of manufacture
button (page 10).
HS94P
GB
19