Pkm 6091BY Bedienungsanleitung Seite 29

2. Place the suspension device on the wall. Select the position relevant to the
dimensions of the entire appliance. Mark the drillings with a pencil before.
3. Drill the holes and fix the suspension
device with the screws and dowels.
4. Hang the hood on the fixed
suspension device.
5. Install the flat bar on the bottom chimney first, then on the wall. You can carry
out this step provisionally to mark the drillings of the wall mounting and drill the
relevant holes.
Chimney
6. Place the top and bottom chimney on the hood and fix the bottom one on it
(look at the drawing connect chimney to hood).
7. Fix the chimney-installation bracket below the ceiling on the wall using the screws
and dowels.
Screw chimney ↔
bracket
Wall
29
Chimney
Screw chimney ↔
bracket