English - Kenwood SS441 Bedienungsanleitung

safety
Never unscrew the water tank cap
whilst the unit is pressurised. Steam
will shoot out and burn you. To
depressurise, turn the iron switch on,
but ensure the tank switch is off.
Press the steam button to release
excess pressure and steam.
Don't get burnt by the iron's steam,
hot water or soleplate.
Keep children away from the steam
station. And make sure they can't
grab the cords and pull the steam
station down.
Trailing cords are a hazard, keep
them out of the way to prevent
accidents.
Never iron clothes being worn.
Never put the steam station, cord or
plug in liquid – you could get an
electric shock.
Always unplug the steam station
when filling the water tank .
Don't let the power and steam
supply cords touch hot parts.
Don't let infirm people use the steam
station without supervision.
During ironing pauses and after use
always place the iron flat on the iron
rest of the steam station.
Never leave the steam station on
unattended.
Never use a damaged steam station.
Get it checked or repaired: see
'service and customer care'.
Only use this appliance for its
intended domestic use.
Don't let children play with the steam
station.
Don't touch the appliance with wet
or damp hands.
Always unplug the steam station
when not in use and allow to cool
before moving or cleaning.

English

It is extremely dangerous to direct
the steam towards people or
animals.
Only use water with this appliance.
During use, the steam station must
be stable and used in a horizontal
position.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the steam station.
important – UK only
The wires in the cord are coloured
as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live
This iron complies with European
Economic Community Directive
89/336/EEC.
before using for the first time
1 Remove all packaging and any
stickers or labels.
2 Test the iron on an old cloth to make
sure the soleplate and water tank are
clean. We recommend that you
allow steam to disperse by pressing
the steam button in order to release
any residues that may have built up
during the manufacturing process.
Repeat step 2 after prolonged
periods of storage.
2