English - Kenwood ST680 Handbuch

safety
Never bend the cord guard when
wrapping the cord around the iron -
in time the cord will burn out.
Don't get burnt by the iron's steam,
hot water or soleplate.
Steam or hot water can come out of
the soleplate when you're not
expecting it, such as when you raise
the iron from flat to upright. So make
sure no one's in the way.
Keep children away from the iron.
And make sure they can't grab the
cord and pull the iron down.
Never iron clothes being worn.
Never put the iron, cord or plug in
liquid - you could get an electric
shock.
Never use a damaged iron. Get it
checked or repaired: see 'service
and customer care'.
Never leave the iron on unattended.
Unplug:
before filling with water or
emptying water out
before cleaning
straight after use
During ironing pauses, never leave
the iron flat - it could burn what's
underneath. Leave it upright.
Don't let infirm people use the iron
without supervision.
Don't let children play with the iron.
This iron is for domestic use only.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
heel of your iron.
important - UK only
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
This iron complies with European
Economic Community Directive
89/336/EEC.

English

before using for the first time
1 Remove all packaging and any
stickers or labels, (including those on
the soleplate).
2 Test-iron an old cloth to make sure
the soleplate and water tank are
clean.
know your Kenwood
iron
water fill inlet
variable steam/self clean control
spray button
shot of steam button
cord guard
heel
temperature light
temperature control
soleplate: aluminium ST680,
non-stick ST682/ST692,
silver non-stick ST702
stainless steel ST685/ST705
jug
using your iron
filling with water
1 Unplug.
2 Stand the iron upright. Set the
variable steam control to ' '
3 Open the water fill inlet, then fill with
tap water using the jug
water fill inlet after filling.
If your tap water's hard, use filtered
water - it'll increase the life of your
iron. (Kenwood water filters are
widely available). Don't use distilled
water.
Never fill above 'max'.
After ironing, unplug, open the water
fill inlet and empty out any remaining
water.
2
. Close