English - Kenwood ST485 Bedienungsanleitung

safety
G
Never bend the cord guard when
wrapping the cord around the iron -
in time the cord will burn out.
G
Don't get burnt by the iron's steam,
hot water or soleplate.
G
Steam or hot water can come out of
the soleplate when you're not
expecting it, such as when you raise
the iron from flat to upright. So make
sure non one's in the way.
G
Keep children away from the iron
and make sure they can't grab the
cord and pull the iron down.
G
Never iron clothes being worn.
G
Never put the iron, cord or plug in
liquid - you could get an electric
shock.
G
Never use a damaged iron. Get it
checked or repaired: see 'service
and customer care'.
G
Never leave the iron on unattended.
G
Unplug:
before filling with water or
G G
emptying water out
before cleaning
G G
straight after use.
G G
G
During ironing pauses, never leave
the iron flat - it could burn what's
underneath. Leave it upright.
G
Don't let infirm people use the iron
without supervision.
G
Don't let children play with the iron.
G
This iron is for domestic use only.
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
heel of your iron.
important
G
This kettle complies with European
Economic Community Directive
89/336/EEC.
before using for the first time
G
Remove all packaging and any
stickers or labels, (including those on
the soleplate).
G
Test-iron an old cloth to make sure
the soleplate and water tank are
clean.

English

know your Kenwood iron
water fill inlet
variable steam/self clean knob
spray button
shot of steam button
cord guard
heel
temperature light
temperature control
stainless steel soleplate ST485
jug
using your iron
filling with water
1 Unplug.
2 Stand the iron horizontal on it's
soleplate. If it is not cool, be sure to
place the iron on a heat-proof
surface such as the ironing board.
Set the variable steam control to dry
.
3 Open the water fill inlet, then fill with
tap water using the jug
overfill.
G
If your tap water's hard, use filtered
water - it will increase the life of your
iron. Don't use distilled water.
G
Never fill above 'max'.
G
After ironing, unplug, open the water
fill inlet and empty out any remaining
water.
choosing the right
temperature
Follow the clothes label advice.
Match the dots on the label to the
dots on the temperature control. If
there's no label, here is a guide on
which temperature to choose:
linen
cotton
wool, silk
synthetics (eg acrylic, nylon,
polyester, viscose)
2
. Do not
max
GGG
GG
G