Profile Design CO2 Mount Installationsanleitung

Note to Dealers: If you install this product for the consumer, please provide him/her with this owner's
manual after installation.
Please read these instructions thoroughly before attempting to install this accessory.
Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar
with the installation of triathlon accessories please seek the assistance of your Local Profile Design
dealer by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's
customer service number.
WARNING
• Any failure to follow these warnings and instructions can result in breakage, slippage and or
other malfunctioning of this Profile Design component causing a loss of control of the bicycle
with serious injuries. [AP1100-1-1]
• A creaking component can be a sign of potential problems. Make sure all contact surfaces
between components are clean, all bolt threads are greased or are treated with proper thread
lock and tightened to Profile Design's (or the bike manufacturer's) specifications and all
components are properly sized to fit together. If you continue to experience creaking stop
using the Profile Design component and call Profile Design customer service. [AP0601-2-2]
• Under tightening a bolt can result in a part coming loose while riding and an over
tightened bolt can break unexpectedly or strip the threads it is engaging while riding also
resulting in a loss of control. All bolts must be tightened to Profile Design's (or the bike
manufacturer's) torque specifications. On the first and any subsequent assembly examine
all male and female threads and bolts for stripped threads, cracks and any required
lubrication or thread locking compound. [AP1100-3-2]
• Periodically, closely examine all surfaces of this Profile Design component (after cleaning) in
bright sunlight to check for any small hairline cracks or fatigue at "stress points" (such as welds,
seams, holes, points of contact with other parts etc.). If you see any cracks, no matter how
small, stop using the part immediately and call
Profile Design customer service. [AP0302-4-2]
• Whenever you install any new component on your bike make sure you thoroughly try it out
close to home (with your helmet) where there are no obstacles or traffic. Make sure everything
is working properly before going off on a ride or to a race. [AP1100-5-1]
Profile Design, LLC
Worldwide Limited Warranty
Profile Design LLC warrants to the original retail purchaser ("you") that the Profile Design product
for which they received this warranty is free from defects in material and workmanship for two
years from the date of original retail purchase. This warranty is not transferable to a subsequent
purchaser. Profile Design's sole obligation under this warranty is to repair or replace the product,
at Profile Design's option. Profile Design must be notified in writing of any claim under this
warranty within 60 days of any claimed lack of conformity of the product.
Warranty Limitations
The duration of any implied warranty or condition, of merchantability, fitness for a particular
purpose, or otherwise, on this product shall be limited to the duration of the express warranty
set forth above. In no event shall Profile Design be liable for any loss, inconvenience or
damage, whether direct, incidental, consequential or otherwise, resulting from breach of any
express or implied warranty or condition, of merchantability, fitness for a particular purpose, or
otherwise with respect to this product, except as set forth herein. Some states or countries do
not allow limitation on how long an implied warranty lasts and some do not allow exclusions or
limitations of incidental or consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other
rights, which may vary, from location to location. This warranty will be interpreted pursuant
to the laws of the United States. The original English language version/meaning of this
warranty controls over all translations and Profile Design is not responsible for any errors
in translation of this warranty or any product instructions. This warranty is not intended to
confer any additional legal, jurisdictional or warranty rights to you other that those set forth
herein or required by law. If any portion of this warranty is held to be invalid or unenforceable
for any reason, such finding will not invalidate any other provision. For products purchased in
countries other than the United States please contact Profile Design's authorized distributor in
that respective country.
Warranty Service Options
To obtain service under this warranty you must either:
(1) Bring or send your Profile Design product, together with this warranty, the retail seller's
original receipt or other satisfactory proof of the date of purchase to the retailer where you
purchased the item or another authorized Profile Design retailer, or
(2) Send your Profile Design product (with the return authorization number on the outside of the
shipping container and affixed to the product), together with the retail seller's original receipt
or other satisfactory proof of the date of purchase to Profile Design 2677 El Presidio St.,
Long Beach, CA 90810 USA. You must first obtain a return authorization number by calling
Profile Design at (310) 884-7756 ext. 161 (or send an email to warranty@profile-design.
com) prior to returning the product to Profile Design.
Profile Design may require that you complete and sign a warranty replacement request form
before processing your warranty claim.Any postage, insurance or other shipping costs incurred
in sending your Profile Design product for service under either option above is your responsibility.
Profile Design will not be responsible for products lost or damaged in shipping.
• Racing (road, mountain or multi-sport) places extreme stress on bicycles and their components
(like it does riders) and significantly shortens their usable life. If you participate in these types of
events, the lifetime of the product may be significantly shortened depending upon the level and
amount of racing. The "normal wear" of a component may differ greatly between competitive
and non-competitive uses, which is why professional level riders often use new bikes and
components each season as well as having their bikes serviced by professional mechanics.
Particular care should be placed in the regular examination of your bicycle and it's components
to insure your safety. [AP1100-6-1]
• A number of factors can reduce the life of this component to less than its warranty period.
Rider size and/or strength and riding style, high mileage, rough terrain, abuse, improper
installation, sweat, adverse environmental conditions (such as salt air or corrosive rain),
travel damage (especially if bike and components are repeatedly disassembled and then
reassembled) and crashes or accidents can all contribute to the shortening of the life of
this component. The more factors that are present, the more the life of the component is
reduced. [AP0801-7-2]
For products purchased in countries other than the United States please contact Profile Design's
authorized distributor in the country where the product was purchased. They can be found on our
website at www.profile-design.com
Profile Design Crash Replacement Policy
Profile Design understands that crashes can happen and replacement of damaged bicycle
parts can be costly. As a result Profile Design will attempt to ease the pain by offering you
a replacement product for 30% below Profile Design's current suggested retail price in your
respective country. All other provisions of this warranty apply and the procedures outlined for
warranty service apply also to the crash replacement policy. Profile Design will make the final
decision on whether the part will be covered under the crash replacement policy.
Warranty Exclusions
Retailers and sellers of Profile Design products are not authorized to modify this warranty in
any way. It is your responsibility to regularly examine the product to determine the need for
normal service or replacement. This warranty does not cover the following:
• Products that have been modified, neglected or poorly maintained, used for commercial
purposes, misused or abused or involved in accidents.
• Damage occurring during shipment of the products (such claims must be presented directly to
the shipper).
• Damage to products resulting from improper assembly or repair, the use or installation of
parts or accessories not compatible with the original intended use of the product, or the
failure to follow the product warnings and usage instructions.
• Damage or deterioration to the surface finish, aesthetics or appearance of the product.
• The labor required to remove and/or re-fit and re-adjust the item covered by this warranty.
• Normal wear to the product.
• Any products for which the consumer does not follow the warranty procedures outlined above.
For the current version of this warranty please visit our website at www.profile-design.com
(© June 2008 Profile Design)
CO2 Mount
Installation Instructions
www.profile-design.com
Profile Design CO2 Mount 01/25/2017