Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
Safety Guidelines
1.
Follow the installation instructions.
2.
Use the appliance
• according to its intended use
• in good condition
• with due regard to safety and risk of danger.
3.
Note that the appliance is exclusively for use in the
applications detailed in these installation instructions
(see 5 Technical Data). Any other use will not be
considered to comply with requirements and would
invalidate the warranty.
4.
Please take note that any assembly, commissioning,
servicing and adjustment work may only be carried
out by authorized persons.
5.
Immediately rectify any malfunctions which may
influence safety.
1.1 Safety instructions in this manual
DANGER!
Places with this sign signify that death, severe
bodily injury or significant property damage will
occur if the appropriate precautionary measures
are not followed!
WARNING!
Places with this sign signify that death, severe
bodily injury or significant property damage may
occur if the appropriate precautionary measures
are not followed!
CAUTION!
Places with this sign signify that small bodily injury
or slight property damage may occur if the
appropriate precautionary measures are not
followed!
Places with this sign provide technical information and
tips on usage that damage to the machine must be
avoided.This symbol is not a safety indication.
Places with this sign provide information about
possible hazards to the environment
Please notice that a safety symbol never can replace
the text of the safety instruction itself - the text of the
safety instruction must be read entirely!
1.2 Safety instructions in the system
DANGER!
Danger of burning on hot surfaces of pump housing
GB
1.3 General safety instructions
This manual contains basic instructions which are to be
observed in transport, assembly, start-up, operation,
maintenance, shut-down, storage and waste disposal.
The following safety instructions have to be observed while
operating the compact booster unit:
•
When using the compact booster unit, the data,
operation and usage conditions specifically
authorised in the technical data sheet and the
operating manual have to be observed.
•
Never exceed the permissible limits pertaining to
pressure, temperature, etc. as stated in the
documentation.
•
Observe all safety instructions as well as the
operating instructions of the manual.
•
Instructions that are directly attached to the system
have to be observed and must be kept completely
legible. This applies for example to:
– Safety instructions
– Arrow for rotation direction
– Connection labels
– Type label
•
Before assembly and start-up, the manual has to be
read by the operator as well as by the responsible
technical/operating personnel and has to be stored at
the site of the compact booster unit at all times.
•
Installation and maintenance work may only be
performed by authorised specialist personnel with the
appropriate tools.
•
The technical condition of the compact booster unit
has to be checked regularly (at least once a year) by
the operating company.
•
The local safety and accident regulations have to be
observed when operating the compact booster unit.
•
The general technical rules must be observed when
planning the usage and operating the device.
•
Modification of the compact booster unit is not
permitted and leads to the loss of warranty.
•
After an interruption of the electrical or fluid supply, a
defined or controlled re-run of the process must be
ensured.
•
The operator is responsible for complying with local
regulations that are not covered by the manual.
1.4 Further safety regulations
In particular, the operator must ensure that
•
Accident prevention regulations, safety and operating
regulations
•
Safety regulations for handling hazardous substances
•
Applicable standards and laws
2
MU1H-1376GE23 R0320
Werbung
Inhaltsverzeichnis
