Shifting The Projected Image To The Right Or Left - Epson ELPMB30 Bedienungsanleitung

Shifting the Projected Image to the Right or Left

Warning
v Keep holding the projector until the installation is complete.
v Do not loosen or remove the screws carelessly during horizontal rotation adjustment.
The projector may fall and cause an accident.
v Do not apply extra force to the plate or projector during adjusting the plates.
The projector or plates may fall and cause an accident.
v After the adjustment, try re-tightening all the screws again and make sure that all of them are securely
tightened.
Procedure
A
Loosen these.
B
Adjust these.
If the screws are tightened, loosen the two screws using the
ball point hex wrench.
While tightening the screws with the ball point hex wrench,
fine tune the position.
17